- Analysis & Instrumentation
- Cleaning, Polishing & Grinding
- Clinical Analysis & Diagnostics
- Coating & Surface Treatment
- Controlled & Modified Atmospheres
- Cutting, Joining & Heating
- Environmental monitoring & protection
- Freezing & Cooling
- Fumigation & Pest Control
- Heat Treatment
- Inerting, purging, sparging
- Melting & Heating
- Pressurisation & Propellant
- Petrochemical Processing & Refining
- Pharmaceutical Processing
- Plastics & Rubber Processing
- Process Chemistry
- Water treatment
- Water and Wastewater Treatment
Examples of heating include flame straightening, flame hardening, hot forming and heating in conjunction with welding. The flame is used for melting purposes in flame brazing and for fusing purposes with flame sprayed coatings. With oxyfuel cutting and gouging, the flame heats to ignition temperature in order to start and maintain the cutting process.
Hydrocarbons such as methane, ethylene, acetylene, propane, and propylene or hydrogen are used as fuel gases for flame heating. The flame temperature and intensity depends on the fuel gases used and oxygen mixing ratio. Acetylene and hydrogen flames can be set to a normal or reducing atmosphere whereas all other common fuel gases have an oxidizing flame.
LINDOFLAMM® is the Linde solution for all your heating requirements.
The main heating applications are described below:
Preheating: Certain materials must be preheated before welding to avoid hardening cracks. After welding, stress relief heat treatment may be necessary in order to reduce welding stress.
Flame straightening: This technique is employed to change or restore the shape of parts that have been distorted. When a defined section is heated beyond its yield limit and the surrounding prevent expansion, plastic deformation will occur. Once cooled, the material will shrink in size. A skilled operator can heat isolated spots to straighten the deformation.
Melting: This involves soldering, brazing and fusing of sprayed coatings as well as flame welding.
Forming: The part to be formed is heated locally. An external force is then applied to form the part. For example, necking out pipe branch stubs.
Shrink fitting: To achieve a change in size used for shrink fitting to securely fit shafts/bearings. Liquid nitrogen can be used for cooling (shrinking) and an oxy-acetylene flame for heating (expanding).
Stress relief heat treatment: This may be necessary after welding.
Metal structure changes: This involves flame hardening.
Benefits at a glance:
Easy to apply – can safe material integrity
Enables a high quality of weld seams
Reduces rework and re-conditioning of products
Reduces risk of hydrogen embrittlement
Most effective with Acetylen as fuel gas
Heating time reduced by up to 20%
Rapid annealing of desired areas
Burner selection adapted to customer demands
Customized gas supply solutions